Journal of Liaoning Petrochemical University
  Journals
  Publication Years
  Keywords
Search within results Open Search
Please wait a minute...
For Selected: Toggle Thumbnails
Simulation of the Consequence of Gas Leakage and Explosion Accident in Canteen Based on FLACS
Youzhi Wang, Ming Wu, Jin Du, Ke Gong
Abstract669)   HTML    PDF (1960KB)(397)      

According to the characteristics of the canteen, the FLACS software was used to build a three?dimensional model for a university canteen. On the basis of considering the jet direction, obstacles and other factors, the leakage and explosion of natural gas were simulated, and the diffusion process of gas cloud, the development law of explosion shock wave and temperature in a specific scene were studied. The results show that when the gas leaks vertically upward, the gas accumulates in the small booth due to the obstruction of the canteen roof. When the natural gas leaks horizontally, the volume fraction of natural gas cloud in the dining area is higher. At the initial stage of the explosion, the explosion pressure shock wave centered on the ignition point first appears, and the pressure shock wave travels outward in a circular arc. The leakage direction has little effect on the maximum over pressure generated by the explosion.The temperature distribution is greatly affected by the direction of leakage. When vertical injection is carried out, the high temperature is concentrated in the small booth. When horizontal injection is carried out, the temperature is distributed from high to low.

2022, 42 (1): 35-40. DOI: 10.3969/j.issn.1672-6952.2022.01.007
Analysis of the Movement Law of the Valve Ball in the Oil Well Pump Based on the Ellipse Rate Drive
Zhigang Duan, Zhi Wang, Minglai Chu, Xiantao Liao, Zhimei Si, Liao Wang
Abstract265)   HTML    PDF (2227KB)(160)      

The flexible control operation technology is used to improve the oil production process of the beam pumping system, and the use of an elliptical speed drive motor is one of the solutions to realize this technology. In order to explore the law of movement of the valve ball in the pump with elliptical velocity drive and conventional circular velocity drive, the delayed opening of the valve ball under two working conditions was analyzed,and a fluid?solid coupling simulation model was established to analyze the force law of the fixed valve. The difference of the valve ball movement under the two working conditions was obtained. Finally, the correctness of the theoretical analysis was verified by the bench experiment. The results show that the rate of opening and reaching the maximum lift of the valve ball under the elliptical velocity drive is slower than that of the conventional circular velocity drive, but it seats faster, which can effectively prevent leakage and achieve the purpose of improving oil recovery efficiency.

2021, 41 (5): 50-54. DOI: 10.3969/j.issn.1672-6952.2021.05.009